[Thinkfinger-devel] SOny UX380N and thinkfinger 0.3, not working

[e***@netscape.net]

First off this sony as a co-processor, I know becuase it needs a driver loaded in windows before I could use the finger print reader.
Second, I'm using the stock 2.6.18.8 kernel from OpenSUSe 10.2
Third
I compiled thinkfinger with: ./configure --enable-usb-debug --enable-pam
Fourth
lsusb, out looks like:
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 002: ID 044e:300d Alps Electric Co., Ltd
Bus 004 Device 001: ID 0000:0000
Bus 005 Device 009: ID 067b:3507 Prolific Technology, Inc. PL3507 ATAPI6 Bridge
Bus 005 Device 008: ID 03f0:0507 Hewlett-Packard
Bus 005 Device 006: ID 05ca:1832 Ricoh Co., Ltd
Bus 005 Device 003: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 005 Device 001: ID 0000:0000
--> Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0637:0003
Bus 002 Device 001: ID 0000:0000
Fifth:
/dev/input/uinput, exists
crw------- 1 root root 10, 223 Apr 19 16:39 /dev/input/uinput


ux380n:/usr/src/thinkfinger-0.3 # tf-tool --acquire --verbose

ThinkFinger 0.3 (http://thinkfinger.sourceforge.net/)
Copyright (C) 2006, 2007 Timo Hoenig <***@suse.de>

Running in verbose mode.

* Mode: acquire
* Biometric identification record file: '/tmp/test.bir'

Initializing...
usb_bulk_read (0x40/0x40): 4369616f0300050162302e32c263369b01000400080f86000000000000000a000a006400f40132000000001000000000000000000800d6660000640100000000

usb_bulk_write (0x11/0x11): 4369616f0400080100e8030000ff07db24

usb_bulk_read (0x40/0x40): 4369616f05000101559f030000ff07db24000400080f86000000000000000a000a006400f40132000000001000000000000000000800d6660000640100000000

usb_bulk_write (0x10/0x10): 4369616f00000728040000000604c0d6

usb_bulk_read (0x40/0x40): 4369616f0000372834000000061414020104140201040d0000006900030010000300000000000400000000000000100000c0c00068010000000001000200c483

usb_bulk_write (0x10/0x10): 4369616f001007280400000007040fb6

usb_bulk_read (0x40/0x40): 4369616f00100f280c00000007147f088d4f6d63c9465f2a00006900030010000300000000000400000000000000100000c0c00068010000000001000200c483

usb_bulk_write (0x28/0x28): 4369616f00201f281c000000080483002c222397c9a715a08aab3cd0bfdbf3926fae3b1e44c49a45

usb_bulk_read (0x40/0x40): 4369616f002007280400e3fb0814974c2c222397c9a715a08aab3cd0bfdbf3926fae3b1e44c49a45000000000000100000c0c00068010000000001000200c483

usb_bulk_write (0x14/0x14): 4369616f00300b28080000000c04030000006d7e

usb_bulk_read (0x40/0x40): 4369616f003007280400eafb0c14da2000006d7ec9a715a08aab3cd0bfdbf3926fae3b1e44c49a45000000000000100000c0c00068010000000001000200c483
Error: usb_bulk_read (-110)

usb_bulk_write (0x78/0x78): 4369616f00406f286c0000000b0403000000600000000300000000000000010000000100000001000000010000000200000000000000f40100006401000000000000020002000000000000000000030001000100000001000000000000000a000a006400f40132000000001000000000000000000800d666

usb_bulk_read (0x40/0x40): 4369616f004007280400eafb0b14961201000100000001000000000000000a000a006400f40132000000001000000000000000000800d6660000640100000000

usb_bulk_write (0xa/0xa): 4369616f070001001c62

usb_bulk_read (0x40/0x40): 4369616f010000303762eafb0b14961201000100000001000000000000000a000a006400f40132000000001000000000000000000800d6660000640100000000
done.

usb_bulk_read (0x40/0x40): 4369616f0300050162302e32c263961201000100000001000000000000000a000a006400f40132000000001000000000000000000800d6660000640100000000

usb_bulk_write (0x11/0x11): 4369616f0400080100e8030000ff07db24

usb_bulk_read (0x40/0x40): 4369616f05000101559f030000ff07db24000100000001000000000000000a000a006400f40132000000001000000000000000000800d6660000640100000000

usb_bulk_write (0x10/0x10): 4369616f00000728040000000604c0d6

usb_bulk_read (0x40/0x40): 4369616f0000372834000000061414020104140201040d0000006900030010000300000000000400000000000000100000c0c00068010000000001000200c483

usb_bulk_write (0x10/0x10): 4369616f001007280400000007040fb6

usb_bulk_read (0x40/0x40): 4369616f00100f280c0000000714c482243d5bbf53ecd01700006900030010000300000000000400000000000000100000c0c00068010000000001000200c483

usb_bulk_write (0x28/0x28): 4369616f00201f281c000000080483002c222397c9a715a08aab3cd0bfdbf3926fae3b1e44c49a45

usb_bulk_read (0x40/0x40): 4369616f002007280400e3fb0814974c2c222397c9a715a08aab3cd0bfdbf3926fae3b1e44c49a45000000000000100000c0c00068010000000001000200c483

usb_bulk_write (0x14/0x14): 4369616f00300b28080000000c04030000006d7e

usb_bulk_read (0x40/0x40): 4369616f003007280400eafb0c14da2000006d7ec9a715a08aab3cd0bfdbf3926fae3b1e44c49a45000000000000100000c0c00068010000000001000200c483
Error: usb_bulk_read (-110)

usb_bulk_write (0x78/0x78): 4369616f00406f286c0000000b0403000000600000000300000000000000010000000100000001000000010000000200000000000000f40100006401000000000000020002000000000000000000030001000100000001000000000000000a000a006400f40132000000001000000000000000000800d666

usb_bulk_read (0x40/0x40): 4369616f004007280400eafb0b14961201000100000001000000000000000a000a006400f40132000000001000000000000000000800d6660000640100000000

usb_bulk_write (0x17/0x17): 4369616f00500e280b0000000202c0d401000400080f86

usb_bulk_read (0x40/0x40): 4369616f005007280400eafb0212369b01000400080f86000000000000000a000a006400f40132000000001000000000000000000800d6660000640100000000
tf-tool: TF_STATE_COMM_FAILED (0xfe)
Could not acquire fingerprint (communication with fingerprint reader failed).

usb_bulk_write (0xa/0xa): 4369616f070001001c62

usb_bulk_read (0x40/0x40): 4369616f010000303762eafb0212369b01000400080f86000000000000000a000a006400f40132000000001000000000000000000800d6660000640100000000







What I did not see was how I tell tf-tool where uinpu is located or if I need to do this?
Any ideas?

Thanks,
ERIC


________________________________________________________________________
Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam and email virus protection.

[Alexis Sukrieh]

Hello,

Here is a test report of thinkfinger 0.3 on a Debian etch system with a
2.6.18 kernel:

***@heracles:/usr/local/src/thinkfinger-0.3$ lsusb
[...]
Bus 003 Device 003: ID 0483:2016 SGS Thomson Microelectronics
Fingerprint Reader
[...]
***@heracles:/usr/local/src/thinkfinger-0.3$ sudo ./tf-tool/tf-tool
--acquire --verbose

ThinkFinger 0.3 (http://thinkfinger.sourceforge.net/)
Copyright (C) 2006, 2007 Timo Hoenig <***@suse.de>

Running in verbose mode.

* Mode: acquire
* Biometric identification record file: '/tmp/test.bir'

Initializing... done.
tf-tool: TF_STATE_COMM_FAILED (0xfe)
Could not acquire fingerprint (communication with fingerprint reader
failed).

Seems like it's better with previous version (the init phase ran
successfully) but it doesn't manage to communicate with te reader.

Any clue?

Thanks!

[k***@tsss.org]

Did you enable the uinput subsystem in your kernel? This is a new requirement for 0.3.

(Sorry for the top-post and not trimming the original message -- sending this from my handheld)

Cheers, and hope this helps.


-kelsey
- sent from my blackberry -

-----Original Message-----
From: Alexis Sukrieh <***@sukria.net>
Date: Mon, 23 Apr 2007 16:21:06
To:***@netscape.net
Cc:thinkfinger-***@lists.sourceforge.net
Subject: Re: [Thinkfinger-devel] SOny UX380N and thinkfinger 0.3, not
working

Hello,

Here is a test report of thinkfinger 0.3 on a Debian etch system with a
2.6.18 kernel:

***@heracles:/usr/local/src/thinkfinger-0.3$ lsusb
[...]
Bus 003 Device 003: ID 0483:2016 SGS Thomson Microelectronics
Fingerprint Reader
[...]
***@heracles:/usr/local/src/thinkfinger-0.3$ sudo ./tf-tool/tf-tool
--acquire --verbose

ThinkFinger 0.3 (http://thinkfinger.sourceforge.net/)
Copyright (C) 2006, 2007 Timo Hoenig <***@suse.de>

Running in verbose mode.

* Mode: acquire
* Biometric identification record file: '/tmp/test.bir'

Initializing... done.
tf-tool: TF_STATE_COMM_FAILED (0xfe)
Could not acquire fingerprint (communication with fingerprint reader
failed).

Seems like it's better with previous version (the init phase ran
successfully) but it doesn't manage to communicate with te reader.

Any clue?

Thanks!

--
Alexis Sukrieh

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Thinkfinger-devel mailing list
Thinkfinger-***@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/thi

[Timo Hoenig]

Hi Alexis,

Sorry for the lag.

Post by Alexis Sukrieh
Initializing... done.
tf-tool: TF_STATE_COMM_FAILED (0xfe)
Could not acquire fingerprint (communication with fingerprint reader failed).
Seems like it's better with previous version (the init phase ran
successfully) but it doesn't manage to communicate with te reader.
Any clue?

What system are you using?

Thanks,

Timo